To order conference bridging service:
1. Call 426-6200 or 1-888-262-2661. 
2. Tell the Customer Service Center representative the date and time of the call, the approximate length of call and the number of locations participating.
3. The HunTel Customer Service representative will give you a pre-assigned number for you and your participants to call in to on the date of the conference call. 

To Use Conference Bridging Service
1. Call the pre-assigned number.
2. A tone will alert the other callers that a new caller has joined the call.
3. Hang up when the conference call is completed.

Contact
Customer Service

Call forwarding allows you to receive calls at another location.

To Set Up Call Forwarding:
1. Pick up the handset.
2. Wait one (1) second for the dial tone.
3. Enter the desired Call Forwarding code:

4. Press the telephone number where the calls are to be forwarded.
5. Wait for someone to answer. If you are forwarding to Voice Mail, wait for the system to answer.
6. Forwarding is set up if the ringing telephone is answered. If no one answers or the phone is busy, hang up and repeat Steps 1 through 4 to activate Call Forwarding.
7. A confirmation tone means Call Forwarding is activated.

* If you wish to select a different number of rings, pick up the phone and press *44. Then press the number of times you want your phone to ring. Your options are 1 to 9 rings.
  

To Cancel Call Forwarding:
If your phone is currently forwarded, you must cancel Call Forwarding before forwarding to another location.
1. Pick up the handset.
2. Enter the appropriate Call Forwarding cancel code:

3. Hang up.

To set up call forward from a remote location: 
You must change your PIN from your own phone before you can use this feature the first time. 
1. Enter *97 and listen to the message.
2. Enter *54, # and follow the prompts to enter a new PIN.
3. Hang up.

To use call forward from a remote location: 
1. Call 426-7090.
2. Listen for the line to ring and wait for a special recording.
3. Enter your 7-digit telephone number that has the Call Forwarding feature assigned to it (your home or business telephone number).
4. Enter your Personal Identification Number (PIN) followed by #.

To Activate:
1. Press *72 and follow recorded instructions.

To Deactivate:
1.Press *73 and listen for confirmation tone.
When any type of Call Forwarding is in effect, you can still make outgoing calls.

Contact
Customer Service

To use call transfer: 
1. Depress the switchhook for about 1/2 second. This places the person with whom you are talking, on hold.
2. Wait for dial tone.
3. Call the telephone number of the third person to whom you want to transfer the call.
4. When the third person answers, you can talk privately before connecting the other call. Hang up the phone to transfer the call.
5. For a three-way conversation, depress the switchhook for about 1/2 second to add the person you have on hold.

*If the switchhook isn't held long enough, a three-way call may be activated. If this occurs, you will be charged $.50. 
 

Contact
Customer Service

To Set Up Automatic Callback:
1. Call a local telephone number and receive a busy signal.
2. Depress the switchhook for about one second.
3. Listen for a dial tone.
4. Press *77.
5. The last number is redialed. If the number is available, your call is completed. If the line is busy, a recording notifies you that your telephone will ring the dialed number when it becomes available.
6. Hang up the phone.
7. When the line is free, you will hear two short rings on your phone. Pick up your phone and the other line will ring.

To Cancel Automatic Callback:
1. Lift the handset.
2. Press *86.
3. A recording notifies you that it is cancelled.
4. Hang up the phone.

Contact
Customer Service

Contact
Customer Service

To Use Teen Service:
1.Wait until the full ringing pattern is complete before answering your telephone. The ringing pattern will indicate which telephone number is ringing.

Contact
Customer Service

To Use Call Waiting:
When you are on the telephone and hear a “beep,” you have three options:
1. Hang up. This ends your first call and the phone will ring. Pick up the receiver and you are connected to the second call. 
2. Depress the switchhook for ½ second. The first call is put on hold and you are then connected to the second call. Alternate between calls each time you depress the switchhook for ½ second.
3. Keep talking to the first call. The second call will not interrupt you. They may think you are unavailable because they hear the phone ring. 

To Cancel Call Waiting:
Cancel Call Waiting tones when you do not want to interrupt a special telephone call or computer transmission.
1. Pick up the handset.
2. Press *70.
3. Wait for the special dial tone.
4. Enter the telephone number. You can now carry on a conversation or computer transmission without interruption. Call waiting is automatically reactivated when you hang up the phone.

Contact
Customer Service

Contact
Customer Service

To Use Intercom Calling:
1. Call your own telephone number. Wait for an announcement.
2. Hang up. All phones on your line will ring. When the ringing stops, someone in your home has picked up an extension.
3. Pick up your phone and talk.

Contact
Customer Service

To Use On A Per-Call Basis:
1. Pickup the handset.
2. Press *67.
3. Call the telephone number. The called party’s ID unit will display “private caller.” You must press *67 each time you make a call to reactivate Calling Number Display Blocking.

To Use On A Permanent Basis:
No codes are necessary. If you have an unpublished or unlisted telephone number, Calling Number Display Blocking is provided at no charge.

To Send A Call If You Have The Caller ID Block Feature:
1. Pickup the handset.
2. Press *82.
3. Call the telephone number. Your number will display on the called party’s Caller ID unit.

Contact
Customer Service

$2.50 per month

50 cents per use

Free

$2.50 per month

$2.50 per month

50 cents per use

$2.50 per month

$2.50 per month